{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lightweight revolving lathe centre 5
Article no.: 320675 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 90 mm | |
| Overall length L | 257.5 mm | |
| Reach B | 128 mm | |
| largest centre point ⌀ 60° A | 40 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 49.5 mm | |
| maximum speed | 3,000 min-1 | |
| for workpiece weight | 2,000 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320675 5 | |
| EAN / GTIN | 5907412202730 | |
| Manufacturer number | 800006625 |
Description
Version:
- Point angle 60°.
- Lightweight version, maintenance-free.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For roughing and precision turning on lathes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Lightweight revolving lathe centre 5 |
|||
| for workpiece weight | 2,000 | 2,000 | 2,000 |
| Body ⌀ D | 90 | 78 | 96 |
| maximum speed | 3,000 | 3,200 | 2,600 |
| maximum radial run-out | 0.005 | 0.005 | 0.005 |
| Morse taper | MK5 | MK5 | MK5 |
| Reach B | 128 | 118 | 134 |
| Type of product | Centring drill | Centring drill | Centring drill |