{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | WNMG 080408 | |
Corner radius | 0.8 mm | |
Grade | HB7010-1 | |
Tool material | Carbide | |
Main application | P | |
Cutting conditions | continuous | |
Chip breaker | SG | |
Cutting depth ap | 1.5 mm - 6 mm | |
Feed f | 0.25 mm/rev. - 0.6 mm/rev. | |
Cutting speed vc main application | 100 m/min - 375 m/min | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Roughing | |
Type of product | Indexable insert for turning |
Article number | 252208 HB7010-1 | |
EAN / GTIN | 4045197780362 | |
Manufacturer number | 252208 HB7010-1 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
WNMG 080408, Grade: HB7010-1 |
||||||||
Number of changes/inserts | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
Corner radius | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm | 0.8 mm |
Finishing/roughing assignment | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing |
Tool material | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
Cutting conditions | continuous | slightly interrupted | continuous | slightly interrupted | heavily interrupted | slightly interrupted | slightly interrupted | slightly interrupted |
Grade | HB7010-1 | HB7020 | HB7120-1 | HB7140-1 | HB7035-1 | HB7210-1 | HBT130 | HBT020 |
Chip breaker | SG | SG | VG | VG | SG | GG | MR | PR |