{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 32 mm | |
Number of cutting edges Z | 3 | |
Shank type | with threaded shank | |
Milling application | Circular milling; Plunging; Ramping | |
Machining strategy | HPC | |
Through-coolant | yes | |
⌀ D3 | 17 mm | |
maximum cutting depth ap max | 1.5 mm | |
Overall length Ltot | 43 mm | |
Mounting thread M | M16 | |
Circular interpolation milling ⌀ Dmin | 49 mm | |
Circular interpolation milling ⌀ Dmax | 62 mm | |
Ramping angle αmax | 0.88 degrees | |
Ramping length L for αmax | 16.3 mm | |
suitable indexable insert | XD.. 0904 | |
Indexable insert size | 09 | |
Insert screw | 229918 (T15; 2.1 Nm) | |
Type of product | Copy mill |
Article number | 221905 32/3 | |
EAN / GTIN | 2050002058538 | |
Manufacturer number | 5660448 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() High feed rate milling cutter 7792VX 32/3 mm |
||||
Number of cutting edges Z | 3 | 3 | 3 | 3 |
Milling application | Circular milling ;Plunging ;Ramping | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging | Circular milling ;Ramping ;Plunging |
Through-coolant | yes | yes | yes | yes |
Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
⌀ D3 | 17 | 16 | 20 | 22 |
Ramping length L for αmax | 16.3 | 15.5 | 17.43 | 19.55 |
Type of product | Copy mill | Copy mill | Copy mill | Copy mill |