{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM, TiAlN, ⌀ js14 DC: 12mm
Article no.: 192541 12
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Milling profile: WR
- Tolerance nominal ⌀: js14
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | js14 | |
| No. of teeth Z | 3 | |
| Helix angle | 36 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 53 mm | |
| Overall length L | 110 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.7 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.05 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192541 12 | |
| EAN / GTIN | 4045197547545 | |
| Manufacturer number | 192541 12 |
Application Table
N
138
M
23
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
- Wide, precision ground chip flutes.
- Special chip angle for aluminium and non-ferrous metals.
For the most demanding metal removal rates.
Advantage:
Suitable for high machining volumes due to the large flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Roughing end mill HSS-PM, TiAlN, ⌀ js14 DC: 12mm |
||||||
| Colour ring | yellow | without | without | yellow | without | without |
| Milling profile | WR | NF | NF | WR | HR | NR |
| Overall length L | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm |
| Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |
| Tool material | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Tolerance nominal ⌀ | js14 | k10 | js12 | js14 | js12 | k12 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |