{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-E-SPM HPC, TiAlN, ⌀ k10 DC: 20mm
Article no.: 191632 20
Article code:
- Tool material: HSS E SPM
- Standard: DIN 327
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS E SPM | |
| Standard | DIN 327 | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 25 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 22 mm | |
| Overall length L | 88 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 1100 N/mm2 | 0.042 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191632 20 | |
| EAN / GTIN | 4045197199065 | |
| Manufacturer number | 191632 20 |
Application Table
N
159
N
125
P
95
P
74
P
74
P
42
P
32
M
26
M
21
K
63
N
125
Description
Version:
Special SPM substrate with very high cobalt content.
Combines the hardness of solid carbide and the toughness of PM steel.
Dimensions to DIN 327.
Combines the hardness of solid carbide and the toughness of PM steel.
Dimensions to DIN 327.
Advantage:
This end mill can be used on a wide range of materials due to the universal geometry.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
End mill HSS-E-SPM HPC, TiAlN, ⌀ k10 DC: 20mm |
||||||
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Flute length Lc | 22 mm | 38 mm | 22 mm | 38 mm | 38 mm | 38 mm |
| Machining strategy | HPC | HPC | HPC | HPC | MTC | HPC |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |