{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS-E jobber drill, TiAlN, ⌀ DC h8: 10,2mm
Article no.: 114500 10,2
Article code:
- Tool material: HSS E
- Standard: DIN 338
- Tolerance nominal ⌀: h8
- Point angle: 130
- Helix angle: 35
Product details
Technical Data
| Nominal ⌀ DC | 10.2 mm | |
| Coating | TiAlN | |
| Tool material | HSS E | |
| Standard | DIN 338 | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 35 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 71.7 mm | |
| Flute length Lc | 87 mm | |
| Overall length L | 133 mm | |
| Shank ⌀ Ds | 10.2 mm | |
| Feed f in stainless steel > 900 N/mm2 | 0.09 mm/rev. | |
| Colour ring | blue | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114500 10,2 | |
| EAN / GTIN | 4045197020475 | |
| Manufacturer number | 114500 10,2 |
Application Table
P
37
P
31
M
15
M
12
S
6
Description
Version:
Strengthened core taper.
With point geometry shape C.
With point geometry shape C.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
HSS-E jobber drill, TiAlN, ⌀ DC h8: 10,2mm |
||||||||||
| Colour ring | blue | yellow | red | without | without | blue | green | without | green | green |
| Through-coolant | no | no | no | no | no | no | no | no | no | no |
| Nominal ⌀ DC | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm | 10.2 mm |
| Standard | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 | DIN 338 |
| Shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | Plain shank | DIN 1835 A to h6 | Three drive flats shank | Plain shank | Plain shank |
| Tool material | HSS E | HSS | HSS E | HSS E | HSS E | HSS Co 8 | HSS E PM | HSS E | HSS E | HSS E PM |
| recommended maximum drilling depth L2 | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm | 71.7 mm |