{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
KUB Pentron® indexable drill Plain shank 30,5 mm
Art-nr: 236614 30,5
Artikelnummer:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Produktdetaljer
Tekniska data
| Series | KUB Pentron® | |
| Nominal ⌀ D | 30.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 62 mm | |
| Overhang LA | 86 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| ISO code indexable insert | SOGX 100408 32-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identifieringsnummer och klassificeringar
| Artikelnummer | 236614 30,5 | |
| EAN/GTIN | 4047109277847 | |
| Tillverkarens nummer | U42 33050 |
Benämning
Version:
Bore tolerance: ⌀D − 0.1 / + 0.2
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Nedladdningar och dokument
Jämför med liknande produkter
Den här artikeln |
Rekommendationer |
|
|---|---|---|
KUB Pentron® indexable drill Plain shank 30,5 mm |
||
| Number of cutting edges Z | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D |
| Through-coolant | yes | yes |
| ISO code indexable insert | SOGX 100408 32-... | SOGX 100408 |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | 239700 10IP (2.8 Nm) |
| Reach L1 | 62 | 62 |
| Type of product | Indexable drill | Indexable drill |