{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
KOMET KUB Pentron® Burghiu cu plăcuţe amovibile Coadă cilindrică 30 mm
Cod articol: 236614 30
Codul articolului:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Detalii despre produs
Date tehnice
| Series | KUB Pentron® | |
| Nominal ⌀ D | 30 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 60 mm | |
| Overhang LA | 83 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| ISO code indexable insert | SOGX 09T308 28-... | |
| Pack of insert screws | 239652 8IP6 (2.2 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Numere de identificare și clasificări
| Cod articol | 236614 30 | |
| EAN / GTIN | 4047109277854 | |
| Număr producător | U42 23000 |
Descriere
Version:
Bore tolerance: ⌀D − 0.1 / + 0.2
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.
Descărcări și documente
Comparați cu produse similare
Acest articol |
Recomandări |
||
|---|---|---|---|
KOMET KUB Pentron® Burghiu cu plăcuţe amovibile Coadă cilindrică 30 mm
La cerere
Livrabil în 1-2 săptămâni
0 livrabil imediat
498,52 €
plus TVA,
plus cost livrare
|
|||
| Number of cutting edges Z | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D |
| Through-coolant | yes | yes | yes |
| Shank | ISO 9766 | ISO 9766 | ISO 9766 |
| Shank ⌀ Ds | 32 | 32 | 32 |
| Machining strategy | HPC | HPC | HPC |
| Reach L1 | 60 | 60 | 63 |