{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
GARANT Master Steel Minifreză din carbură monobloc HPC, TiAlN, ⌀ e8 DC: 1,2mm
Cod articol: 202289 1,2
Codul articolului:
- Skärmaterial: VHM
- Norm: Normă de fabricaţie
- Typ: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Detalii despre produs
Date tehnice
| Serie | Master Steel | |
| Cutting edge ⌀ DC | 1.2 mm | |
| Beläggning | TiAlN | |
| Skärmaterial | VHM | |
| Norm | Normă de fabricaţie | |
| Typ | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horisontell, sned och vertikal | |
| Ingreppsbredd ae vid fräsoperation | fullspår sågdjup 1×D; fullspår sågdjup 1×D | |
| Shank | DIN 6535 HA med h6 | |
| Invändig | nu | |
| Bearbetningsstrategi | HPC | |
| Flute length Lc | 2 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.005 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 mm | |
| Färgring | grön | |
| Produktslag | Hörnfräs |
Numere de identificare și clasificări
| Cod articol | 202289 1,2 | |
| EAN / GTIN | 4062406271077 | |
| Număr producător | 202289 1,2 |
Tabel de aplicaţii
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Descriere
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Save the regrinding costs: It is cheaper to use a carbide mini slot drill to the limit of wear and throw it away, than to regrind it.
Tool for general-purpose machining.
Note:
HB shanks are available at the same price as HA.
For HB shanks use order no. 202291.
For HB shanks use order no. 202291.
Descărcări și documente
Comparați cu produse similare
Acest articol |
Recomandări |
|||
|---|---|---|---|---|
GARANT Master Steel Minifreză din carbură monobloc HPC, TiAlN, ⌀ e8 DC: 1,2mm
La cerere
În stoc
Available in 11-14 working days
52 livrabil imediat
52 pieces available in 11-14 working days
21,50 €
plus TVA,
plus cost livrare
|
||||
| Overall length L | 38 mm | 38 mm | 38 mm | 38 mm |
| Invändig | nu | no | no | no |
| Skärmaterial | VHM | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
| Direction of infeed | horisontell, sned och vertikal | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 3 mm | 3 mm | 3 mm | 3 mm |
| Produktslag | Hörnfräs | End / face mill | End / face mill | End / face mill |