{{ name }}
Artikkelnr. {{ combinedCodeWithHighlight }}
Artikkelkode:
EAN / GTIN:
Manufacturer number:
Vändskärsborr kombiskaft 3×D 22 mm GARANT
Article no.: 232300 22
Artikkelkode:
- Borrdjup för vändskärsborr upp till: 3×D
- Skaft: DIN 6535 HE, DIN 6595
- Borranvändning: Centrumborr; snedställd borrstart; kräver kryssborrning; Urgröpning; Snedställt borrutlopp; sned förborrning
- Invändig: ja
- Bearbetningsstrategi: MTC
Produktinformasjon
Technical Data
| ⌀ nominal D | 22 | |
| Borrdjup för vändskärsborr upp till | 3×D | |
| Skaft | DIN 6535 HE, DIN 6595 | |
| Borranvändning | Centrumborr; snedställd borrstart; kräver kryssborrning; Urgröpning; Snedställt borrutlopp; sned förborrning | |
| Invändig | ja | |
| Bearbetningsstrategi | MTC | |
| Lungime utilă L1 | 66 mm | |
| Lungime activă LA | 90 mm | |
| ⌀ cozii Ds | 25 mm | |
| Lungimea cozii Ls | 56 mm | |
| Limită maximă de ajustare Vmax | 0,5 mm | |
| Cod ISO Plăcuţă amovibilă | WOEX 040304 | |
| Set de şuruburi pentru plăcuţe amovibile | 239700 6IP1 (1,0 Nm) | |
| Număr de dinţi Z | 1 | |
| Lungimea totală L | 146 mm | |
| Produktslag | Vändskärsborrar |
Identification numbers & Classifications
| Artikkelkode | 232300 22 | |
| EAN / GTIN | 4045197345981 | |
| Manufacturer number | 232300 22 |
Beskrivelse
Version:
High stability and very high process reliability.
Application:
For stationary and rotating application.
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
For holes free of withdrawal scoring and exact dimensional accuracy (approx. ± 0.1 mm).
Also suitable for machines with low drive power. Especially for MTC (Multi Task Cutting) use on the new generation of turning/milling centres (MTM).
Suitable for:
Inserts WOEX 040304.
Note:
CAUTION!
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
A disc falls off when the drill exits.
Risk of injury if the component is rotating.
Please take safety precautions.
Counterboring tools with up to 2 steps to your specification available on request. (Minimum order quantity: 2 pieces).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Vändskärsborr kombiskaft 3×D 22 mm GARANT
on request
På lager
Available in 11-14 working days
20 styck i lager
20 pieces available in 11-14 working days
NOK 4 359,14
plus VAT at the current rate
Prices plus delivery costs
|
on request
På lager
16 styck i lager
303,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Limită maximă de ajustare Vmax | 0,5 mm | 0,5 mm |
| ⌀ nominal D | 22 | 22 |
| ⌀ cozii Ds | 25 mm | 20 mm |
| Lungimea cozii Ls | 56 mm | 50 mm |
| Set de şuruburi pentru plăcuţe amovibile | 239700 6IP1 (1,0 Nm) | 239700 6IP1 (1,0 Nm) |
| Lungime utilă L1 | 66 mm | 66 mm |
| Lungime activă LA | 90 mm | 90 mm |