{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill indexable drill Combination shank 26,5 mm
Article no.: 234000 26,5
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 26.5 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 54 mm | |
| Overhang LA | 76 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 080407 | |
| Pack of insert screws | 239700 8IP (1.3 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 234000 26,5 | |
| EAN / GTIN | 4045197739803 | |
| Manufacturer number | 234000 26,5 |
Description
Version:
The helical coolant ducts ensure very high stability, since they do not weaken the core of the drill.
Bore tolerance: −0.1 / +0.3 mm
Bore tolerance: −0.1 / +0.3 mm
Description:
For maximum performance and dimensional accuracy. Even for very difficult drilling situations up to 5×D.
Suitable for:
Inserts SOGX 080407.
Note:
Other intermediate sizes in 1/10 increments available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Drill indexable drill Combination shank 26,5 mm |
||
| Use for drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited oblique spot drilling |
| ISO code indexable insert | SOGX 080407 | SOMT093608 / XOMT093605 |
| Shank ⌀ Ds | 32 | 32 |
| Shank length Ls | 60 | 60 |
| Series | Power Drill | HOLEX Pro |
| Type of product | Indexable drill | Indexable drill |
| Overhang LA | 76 | 77 |