{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Q high feed rate indexable milling cutter 100/7 mm
Article no.: 212817 100/7
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Serie | Power Q | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 7 | |
| Shank type | with bore | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 84 mm | |
| Overall length Ltot | 63 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 184 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 1.5 mm | |
| Ramping angle αmax | 0.57 degrees | |
| Ramping length L for αmax | 80.34 mm | |
| suitable indexable insert | XDM.120516 | |
| Setting angle κ | 11 degrees | |
| Fz Helix | 0.8 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212817 100/7 | |
| EAN / GTIN | 4045197939418 | |
| Manufacturer number | 212817 100/7 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
GARANT Power Q high feed rate indexable milling cutter 100/7 mm |
||||
| Number of cutting edges Z | 7 | 7 | 7 | 7 |
| Setting angle κ | 11 | 15 – 30 | 12 | 15 – 30 |
| Through-coolant | yes | yes | yes | yes |
| suitable indexable insert | XDM.120516 | RD..1604 | XD.. 120408 | RD..1604 |
| Shank type | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 100 | 100 | 100 | 100 |
| Fz Helix | 0.8 | 0.7 | 0.7 | 0.7 |