{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, TiAlN, ⌀ DC: 20mm
Article no.: 203620 20
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 76 mm | |
| Overall length L | 140 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.107 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203620 20 | |
| EAN / GTIN | 4045197200525 | |
| Manufacturer number | 203620 20 |
Application Table
P
120
P
110
P
100
P
90
P
80
H
60
H
50
Description
Version:
For finishing operations. Special geometry for optimum chip evacuation. For profile milling as a finishing operation. Very sturdy version with strengthened core.
Application:
Very suitable for large depths of cut.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ DC: 20mm |
||||||
| Colour ring | without | green | green | green | yellow | yellow |
| Overall length L | 140 mm | 160 mm | 160 mm | 160 mm | 175 mm | 175 mm |
| Through-coolant | no | no | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Helix angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 38 degrees | 38 degrees |
| Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |