{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E-PM, nitrided + vaporised, M: M2,5
Article no.: 132420 M2,5
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Chip clearance in the direction of cutting
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M2.5 | |
| Coating | nitrided + vaporised | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.45 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 2.8 mm | |
| Shank square □ | 2.1 mm | |
| Tapping hole ⌀ | 2.05 mm | |
| Thread ⌀ | 2.5 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 2 | |
| Colour ring | pink | |
| Number of cutting edges Z | 2 | |
| Thread depth | 5 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132420 M2,5 | |
| EAN / GTIN | 4045197071514 | |
| Manufacturer number | 132420 M2,5 |
Application Table
S
6
S
2
N
N
Description
Version:
Strong spiral point. Guide section with oil grooves, but without chip flutes.
Advantage:
Particularly strong, optimum self-guidance and no recutting when reversed.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
Machine tap HSS-E-PM, nitrided + vaporised, M: M2,5 |
|||||
| Coating | nitrided + vaporised | TiAlN | AlTiX | TiN | DLC |
| Through-coolant | no | no | no | no | no |
| Standard | DIN 371 | DIN 371 | DIN 371 | DIN 371 | Works standard |
| Tolerance class | ISO 2X 6HX | ISO 2X 6HX | ISO 2X 6HX | ISO 2 6H | ISO 2X 6HX |
| Thread depth | 5 mm | 7.5 mm | 7.5 mm | 7.5 mm | 10 mm |
| Application for type of drilling | up to 2×D for through holes | up to 3×D for through holes | up to 3×D for through holes | up to 3×D for through holes | up to 4×D for through holes |
| Type of product | Tap | Tap | Tap | Tap | Taps |