{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill HSS-E for Hardox H 25 mm
Article no.: 116380 25
Article code:
- Tool material: HSS Co 8
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 25 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Helix angle | 8-15 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 60.5 mm | |
| Flute length Lc | 98 mm | |
| Overall length L | 219 mm | |
| Morse taper MT size | 3 | |
| Feed f in steel < 1400 N/mm2 | 0.18 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116380 25 | |
| EAN / GTIN | 4045197032683 | |
| Manufacturer number | 116380 25 |
Application Table
P
10
P
8
H
5
S
5
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Jobber drill HSS-E for Hardox H 25 mm |
||||||
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated | uncoated |
| Through-coolant | no | no | no | no | no | no |
| Tool material | HSS Co 8 | HSS | HSS | HSS E | HSS | HSS |
| Point angle | 130 degrees | 118 degrees | 118 degrees | 135 degrees | 118 degrees | 120 degrees |
| Tolerance nominal ⌀ | h8 | h8 | h8 | h8 | h8 | h8 |
| Flute length Lc | 98 mm | 160 mm | 160 mm | 160 mm | 206 mm | 160 mm |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |