{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pair of chemical protective gloves, Glove size: 7
Article no.: 094803 7
Article code:
- Protection class: Protection against bacteriological risks to EN 374
- EN 374: Type B (JKL)
Product details
Technical Data
| Protection class | Protection against bacteriological risks to EN 374 | |
| Glove size | 7 | |
| EN 374 | Type B (JKL) | |
| Resistance to chemicals | JKL | |
| EN 388 | 3101X | |
| Material | Nitrile | |
| Backing material | Nitrile | |
| Scope of application | All-round | |
| Length | 330 mm | |
| Thickness | 0.38 mm | |
| Colour | green | |
| Application | reusable | |
| Protection category | Category III | |
| Type of glove | Chemicals protection gloves | |
| Type of product | Chemicals protection gloves |
Identification & Classification
| Article number | 094803 7 | |
| EAN / GTIN | 4062406711979 | |
| Manufacturer number | 094803 7 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Category III safety gloves.
Re-usable protective gloves made from nitrile for safe handling of chemicals. The diamond finish increases the security of grip. Due to its easy-grip surface, the profile leads to fewer rejects of fragile parts due to damage and therefore reduces indirect costs.
Re-usable protective gloves made from nitrile for safe handling of chemicals. The diamond finish increases the security of grip. Due to its easy-grip surface, the profile leads to fewer rejects of fragile parts due to damage and therefore reduces indirect costs.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protects hands from mechanical risks. Protects hands from chemical risks such as n-heptane, sodium hydroxide 40%, sulphuric acid 96% and against bacteria and fungi.
- Before use, check that the gloves are suitable for the intended purpose. Conditions at the workplace may vary from the type test conditions due to temperature, abrasion and degradation. Before use, check for faults and defects.
- If protective gloves have already been used their physical characteristics may have changed so that their capability to provide resistance to hazardous chemicals is reduced. Where contact with chemicals causes degradation, movement, pulled threads, friction and the like, degradation can be the most significant factor to be taken into consideration when selecting chemical protective gloves.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- No protection is offered against electrical and thermal hazards. Do not use the gloves if they are damaged or not completely leak-tight.
- Protective effect may be lower if used differently.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.