{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | ISOTURN | |
ISO code indexable insert | DCMT 11T302 | |
Corner radius | 0.2 mm | |
Grade | IC807 | |
Tool material | Carbide | |
Main application | P | |
Cutting conditions | continuous | |
Chip breaker | F3P | |
Cutting depth ap | 0.15 mm - 2 mm | |
Feed f | 0.08 mm/rev. - 0.3 mm/rev. | |
Cutting speed vc main application | 50 m/min - 245 m/min | |
Number of changes/inserts | 2 | |
Finishing/roughing assignment | Finishing | |
Manufacturer's designation | DCMT 11T302-F3P IC807 | |
Type of product | Indexable insert for turning |
Article number | 260391 IC807 | |
EAN / GTIN | 7291075338133 | |
Manufacturer number | 3320684 |
This article |
Recommendations |
|||
---|---|---|---|---|
DCMT 11T302, Grade: IC807
on request
In stock
40 pieces in stock
€ 11,55
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
700 pieces in stock
from
1
Pieces
€ 11,64
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 9,70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
607 pieces in stock
from
1
Pieces
€ 11,64
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 9,70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
385 pieces in stock
from
1
Pieces
€ 11,64
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
€ 9,70
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of changes/inserts | 2 | 2 | 2 | 2 |
Corner radius | 0.2 mm | 0.2 mm | 0.2 mm | 0.2 mm |
Finishing/roughing assignment | Finishing | Finishing | Finishing | Finishing |
Cutting depth ap | 0.15 mm - 2 mm | 0.2 mm - 1.5 mm | 0.2 mm - 1.5 mm | 0.2 mm - 1.5 mm |
Chip breaker | F3P | SS | VS | TIS |
Cutting speed vc main application | 50 m/min - 245 m/min | 150 m/min - 500 m/min | 90 m/min - 290 m/min | 50 m/min - 110 m/min |
Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |