{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HELI3MILL shoulder mill 80/5 mm
Article no.: 226490 80/5
Article code:
New product
- Setting angle κ: 90
- Milling application: Plunging; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HELI3MILL | |
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| ⌀ D3 | 75.6 mm | |
| Circular interpolation milling ⌀ Dmin | 155 mm | |
| Circular interpolation milling ⌀ Dmax | 159 mm | |
| Circular interpolation milling ap | 3.7 mm | |
| Ramping angle αmax | 0.9 degrees | |
| Ramping length L for αmax | 833.9 mm | |
| suitable indexable insert | TD..1505.. | |
| Manufacturer's designation | HM390 FTD D080-5-27-15 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226490 80/5 | |
| EAN / GTIN | 7291075313093 | |
| Manufacturer number | 3106399 |
Description
Version:
Reliable shoulder milling system for a wide range of applications. Versions in two system sizes with cutting edge lengths in 10 and 15 mm. Optimally supported Trigon indexable inserts in the seat ensure true 90° shoulders. Ideally suited for circular interpolation milling operations and ramping.
Spare part:
Pack of insert screws No. 229696 2 (IP20; 9.0 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HELI3MILL shoulder mill 80/5 mm
on request
In stock
10 pieces in stock
706,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
780,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
536,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 |
| Mounting bore ⌀ | 27 mm | 27 mm | 27 mm |
| Overall length Ltot | 50 mm | 50 mm | 50 mm |
| suitable indexable insert | TD..1505.. | BG.. 15L5.. | ZDHT 1505 |
| Shank type | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 80 mm | 80 mm | 80 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees |