{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HELI3MILL shoulder mill 100/8 mm
Article no.: 226490 100/8
Article code:
New product
- Setting angle κ: 90
- Milling application: Plunging; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HELI3MILL | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| ⌀ D3 | 95.6 mm | |
| Circular interpolation milling ⌀ Dmin | 195 mm | |
| Circular interpolation milling ⌀ Dmax | 199 mm | |
| Circular interpolation milling ap | 3.6 mm | |
| Ramping angle αmax | 0.7 degrees | |
| Ramping length L for αmax | 1,072.2 mm | |
| suitable indexable insert | TD..1505.. | |
| Manufacturer's designation | HM390 FTD D100-8-32-15 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226490 100/8 | |
| EAN / GTIN | 7291075313116 | |
| Manufacturer number | 3106401 |
Description
Version:
Reliable shoulder milling system for a wide range of applications. Versions in two system sizes with cutting edge lengths in 10 and 15 mm. Optimally supported Trigon indexable inserts in the seat ensure true 90° shoulders. Ideally suited for circular interpolation milling operations and ramping.
Spare part:
Pack of insert screws No. 229696 2 (IP20; 9.0 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
HELI3MILL shoulder mill 100/8 mm
on request
In stock
9 pieces in stock
928,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
619,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 32 mm | 32 mm |
| Milling application | Plunging; Ramping; Plunging | Corner milling; Circular milling; Ramping |
| Cutting edge ⌀ DC | 100 mm | 100 mm |
| Setting angle κ | 90 degrees | 90 degrees |
| Circular interpolation milling ⌀ Dmax | 199 mm | 198 mm |
| Ramping angle αmax | 0.7 degrees | 0.31 degrees |
| Ramping length L for αmax | 1,072.2 mm | 91.95 mm |