{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NEODO indexable face / shoulder mill, with bore, ⌀ DC / number of effective cutting edges Z: 80/8mm
Article no.: 225760 80/8
Article code:
New product
- Setting angle κ: 90
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Series | NEODO | |
| Cutting edge ⌀ DC | 80 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 5 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | SZ.U0804.. | |
| Manufacturer's designation | S890 FSZ D080-08-27-R08 | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 225760 80/8 | |
| EAN / GTIN | 7291075440126 | |
| Manufacturer number | 3388907 |
Description
Version:
Highly efficient milling system for facing and milling 90° shoulders. For roughing and pre-finishing especially of steel and cast iron materials. Cost-effective due to 8 cutting edges per indexable insert. Extremely stable embedding for the inserts in a dovetail-shaped insert seating.
Spare part:
Pack of insert screws No. 229696 3 (IP9; 2.0 Nm).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
NEODO indexable face / shoulder mill, with bore, ⌀ DC / number of effective cutting edges Z: 80/8mm
on request
In stock
11 pieces in stock
€707.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
€640.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
€780.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 6 | 8 |
| Overall length Ltot | 50 mm | 50 mm | 50 mm |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | SZ.U0804.. | SO.. 1205.. | SO.. 1205.. |
| Shank type | with bore | with bore | with bore |
| maximum cutting depth ap max | 5 mm | 10 mm | 10 mm |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing |