{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 7.1 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Version | 5×D | |
Tolerance nominal ⌀ | m7 | |
Number of cutting edges Z | 2 | |
Point angle | 180 degrees | |
recommended maximum drilling depth L2 | 42.4 mm | |
Shank | DIN 6535 HA to h6 | |
Use for drilling | limited convexity; limited cross-drilling; limited oblique spot drilling | |
Through-coolant | yes, with 25 bar | |
Pilot drill required | yes, pilot drill | |
Semi-Standard | yes | |
Flute length Lc | 53 mm | |
Overall length L | 91 mm | |
Shank ⌀ Ds | 8 mm | |
Shank tolerance | h6 | |
Feed f in steel < 900 N/mm2 | 0.12 mm/rev. | |
Colour ring | green | |
Type of product | Jobber drill |
Article number | 122793 7,1 | |
EAN / GTIN | 4045197744975 | |
Manufacturer number | 122793 7,1 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Solid carbide drill plain shank DIN 6535 HA 180° 7,1 mm
on request
Unknown
0 pieces in stock
€123.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€36.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
€36.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
€62.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
€62.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
€106.50
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 | 2 |
Coating | TiAlN | TiN | TiN | TiN | TiN | TiAlN |
Standard | Manufacturer’s standard | DIN 6537 K | DIN 6537 K | DIN 6537 K | DIN 6537 K | Manufacturer’s standard |
Shank tolerance | h6 | h6 | h6 | h6 | h6 | h6 |
Point angle | 180 | 140 | 140 | 140 | 140 | 180 |
Feed f in steel < 900 N/mm2 | 0.12 | 0.18 | 0.18 | 0.18 | 0.18 | 0.12 |
Shank ⌀ Ds | 8 | 8 | 8 | 8 | 8 | 8 |