{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 20 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Version | 5×D | |
Tolerance nominal ⌀ | m7 | |
Number of cutting edges Z | 2 | |
Point angle | 180 degrees | |
recommended maximum drilling depth L2 | 69 mm | |
Shank | DIN 6535 HA to h6 | |
Use for drilling | limited convexity; limited cross-drilling; limited oblique spot drilling | |
Through-coolant | yes, with 25 bar | |
Pilot drill required | yes, pilot drill | |
Semi-Standard | yes | |
Flute length Lc | 99 mm | |
Overall length L | 151 mm | |
Shank ⌀ Ds | 20 mm | |
Shank tolerance | h6 | |
Feed f in steel < 900 N/mm2 | 0.23 mm/rev. | |
Colour ring | green | |
Type of product | Jobber drill |
Article number | 122793 20 | |
EAN / GTIN | 4045197540805 | |
Manufacturer number | 122793 20 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Solid carbide drill plain shank DIN 6535 HA 180° 20 mm
on request
In stock
9 pieces in stock
€683.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
€209.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
€209.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
€612.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
€335.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 |
Version | 5×D | 4×D | 4×D | 3×D | 6×D |
Colour ring | green | without | without | green | green |
Through-coolant | yes, with 25 bar | no | no | yes, with 25 bar | yes, with 25 bar |
Standard | Manufacturer’s standard | DIN 6537 K | DIN 6537 K | Manufacturer’s standard | DIN 6537 |
Shank tolerance | h6 | h6 | h6 | h6 | h6 |
Flute length Lc | 99 | 79 | 79 | 77 | 101 |