{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 18 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Version | 5×D | |
Tolerance nominal ⌀ | m7 | |
Number of cutting edges Z | 2 | |
Point angle | 180 degrees | |
recommended maximum drilling depth L2 | 64 mm | |
Shank | DIN 6535 HA to h6 | |
Use for drilling | limited convexity; limited cross-drilling; limited oblique spot drilling | |
Through-coolant | yes, with 25 bar | |
Pilot drill required | yes, pilot drill | |
Semi-Standard | yes | |
Flute length Lc | 91 mm | |
Overall length L | 141 mm | |
Shank ⌀ Ds | 18 mm | |
Shank tolerance | h6 | |
Feed f in steel < 900 N/mm2 | 0.2 mm/rev. | |
Colour ring | green | |
Type of product | Jobber drill |
Article number | 122793 18 | |
EAN / GTIN | 4045197540799 | |
Manufacturer number | 122793 18 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Solid carbide drill plain shank DIN 6535 HA 180° 18 mm
on request
In stock
10 pieces in stock
€540.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
€241.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
€241.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€500.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
€306.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Semi-Standard | yes | yes | yes | yes | yes |
Overall length L | 141 | 123 | 123 | 121 | 143 |
Through-coolant | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar | yes, with 25 bar |
Nominal ⌀ DC | 18 | 18 | 18 | 18 | 18 |
Shank tolerance | h6 | h6 | h6 | h6 | h6 |
Point angle | 180 | 140 | 140 | 180 | 140 |
Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |