{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
HiPer-Drill grąžtas, 12×D, ⌀ DC: 13mm
Prekės Nr.: 231620 13
Prekės numeris:
- Modelis: 12×D
- Kotas: ISO 9766
- Grąžto panaudojimas: ribotas skersinis gręžimas; ribotas gręžimas paketais; ribotas gręžimas su įkypu išėjimu; ribotas įkypas pragręžimas
- Pjovimo briaunų skaičius Z: 2
- Vidinis aušinimas: taip
Produkto detalės
Techniniai duomenys
| Serija | HiPer-Drill | |
| Modelis | 12×D | |
| Kotas | ISO 9766 | |
| Grąžto panaudojimas | ribotas skersinis gręžimas; ribotas gręžimas paketais; ribotas gręžimas su įkypu išėjimu; ribotas įkypas pragręžimas | |
| Pjovimo briaunų skaičius Z | 2 | |
| Vidinis aušinimas | taip | |
| ⌀ zona Dc | 13 mm - 13,49 mm | |
| Naudingasis ilgis L1 | 162 mm | |
| Koto ⌀ Ds | 16 mm | |
| Koto ilgis Ls | 48 mm | |
| Užveržimo varžtas | 231999 7IP (0,6 Nm) | |
| Bendras ilgis L | 232 mm | |
| Produkto rūšis | Grąžtas su keičiamomis plokštelėmis |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 231620 13 | |
| EAN / GTIN | 4045197687630 | |
| Gamintojo numeris | 231620 13 |
Aprašymas
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled.
- Shank support for optimum stability in operation.
Polished flutes.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
Further sizes up to ⌀ 50.99 mm available on request.
The insert screw must be replaced after every fifth change of cutter insert.
Reduce feed rates f by 10 % and vc values by 40 %.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
The insert screw must be replaced after every fifth change of cutter insert.
Reduce feed rates f by 10 % and vc values by 40 %.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
Atsisiuntimai ir dokumentai
Palyginti su panašiais produktais
Šis produktas |
Rekomendacijos |
||
|---|---|---|---|
HiPer-Drill grąžtas, 12×D, ⌀ DC: 13mm
reikia užklausti
Yra sandėlyje
4 vnt. yra sandėlyje
462,00 €
be PVM
plius siuntimo kaštai
|
|||
| ⌀ zona Dc | 13 mm - 13,49 mm | 13 mm - 17.5 mm | 13 mm - 17.5 mm |
| Pjovimo briaunų skaičius Z | 2 | 2 | 2 |
| Modelis | 12×D | 12×D | 12×D |
| Vidinis aušinimas | taip | yes | yes |
| Kotas | ISO 9766 | ISO 9766 | Morse taper |
| Koto ilgis Ls | 48 mm | 50 mm | |
| Produkto rūšis | Grąžtas su keičiamomis plokštelėmis | Indexable drill | Indexable drill |