{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ER clamping nut with radial run-out adjustment, for ER: 32
Article no.: 309619 32
Article code:
- Standard: DIN 6499 D
Product details
Technical Data
| for ER | 32 mm | |
| Standard | DIN 6499 D | |
| Overall length L | 23 mm | |
| External ⌀ D | 63 mm | |
| Thread | M40×1.5 | |
| Type of product | Clamping nut |
Identification numbers & Classifications
| Article number | 309619 32 | |
| EAN / GTIN | 2050002004030 | |
| Manufacturer number | 145982 |
Description
Version:
Thread and taper ground in a single setup for highest concentricity.
6 screws allow the radial run-out to be reduced to zero.
6 screws allow the radial run-out to be reduced to zero.
With slots.
Suitable for:
All standard ER collet chucks.
Ideally suitable for lathes, both for stationary and driven tools.
Ideally suitable for lathes, both for stationary and driven tools.
Optional extras:
ER clamping wrench, No. 309680 − 309740.
Single open ended spanner (for size 16), No. 613300 size 25.
Single open ended spanner (for size 16), No. 613300 size 25.
Note:
Collet chuck and clamping nut are balanced separately!
Up to 6000 rpm.
Up to 6000 rpm.