{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Pull stud standard: MAS 403
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | MAS 403 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 15 mm | |
| Overall length L | 60 mm | |
| L1 | 35 mm | |
| Thread M | M16 | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308795 40 | |
| EAN / GTIN | 4045197532787 | |
| Manufacturer number | 308795 40 |
Description
Opis:
Držalo orodja se prek priteznega čepa vpenjalnega prijemala vretena pomakne v vreteno. Pritezni čepi so na voljo v različnih izvedbah. Predstavljajo pomemben vezni člen med strojem in orodjem. Zahteve po natančnosti, trdnosti in zanesljivosti priteznih čepov so visoke.
Uporaba:
Za orodja s strmim konusom JIS B 6339 (MAS-BT)/ISO 7388-2.
Opomba:
Zatesnjeno − z O-obročem.
Primeren vpenjalni ključ in zeve ključev najdete v spletni trgovini.
Pri montaži AB upoštevajte pravilen zatezni moment.
Primeren vpenjalni ključ in zeve ključev najdete v spletni trgovini.
Pri montaži AB upoštevajte pravilen zatezni moment.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Pull stud 90° sealed 40 |
on request
In stock
5,599 pieces in stock
10,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,791 pieces in stock
13,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3,248 pieces in stock
9,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
860 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
11,65 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Pull stud standard | MAS 403 | ISO 7388-3 | ISO 7388-3 | ISO 7388-3 | MAS 403 | MAS 403 |
| Overall length L | 60 mm | 54 mm | 54 mm | 54 mm | 60 mm | 60 mm |
| Thread M | M16 | M16 | M16 | M16 | M16 | M16 |
| L1 | 35 mm | 26 mm | 26 mm | 26 mm | 35 mm | 35 mm |
| suitable for steep tapers | 40 | 40 | 40 | 40 | 40 | 40 |
| Hole characteristics | with bore | z izvrtino | z izvrtino | z izvrtino | z izvrtino | z izvrtino |
| Type of product | Pull Stud | Pritezni čep | Pritezni čep | Pritezni čep | Pritezni čep | Pritezni čep |