{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ D | 37 | |
Drill depth for indexable insert drill up to | 2×D | |
Shank | DIN 6535 HE, DIN 6595 | |
Use for drilling | Centre drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
Through-coolant | yes | |
Machining strategy | MTC | |
Reach L1 | 74 mm | |
Overhang LA | 113 mm | |
Shank ⌀ Ds | 32 mm | |
Shank length Ls | 60 mm | |
Maximum adjustment limit Vmax | 1.5 mm | |
ISO code indexable insert | WOEX 06T304 | |
Pack of insert screws | 239700 10IP (2.8 Nm) | |
Number of cutting edges Z | 1 | |
Overall length L | 173 mm | |
Type of product | Indexable drill |
Article number | 232298 37 | |
EAN / GTIN | 4045197677105 | |
Manufacturer number | 232298 37 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() Indexable drill combination shank 37 mm |
|||
Number of cutting edges Z | 1 | 1 | 1 |
Use for drilling | Centre drilling ;oblique spot drilling ;limited cross-drilling ;Aperture ;oblique exit ;convex | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited cross-drilling | limited centre drilling ;limited convexity ;limited cross-drilling ;limited drilling through a stack ;limited drilling with oblique exit ;limited oblique spot drilling |
Through-coolant | yes | yes | yes |
ISO code indexable insert | WOEX 06T304 | SOGX 110509 | SOMT13M510 / XOMT13M506 |
Nominal ⌀ D | 37 | 37 | 37 |
Shank length Ls | 60 | 68 | 70 |
Pack of insert screws | 239700 10IP (2.8 Nm) | 239700 15IP (2.8 Nm) | 232980 6 (TX15;3Nm) |