{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier, Plain shank, ⌀ D / number of teeth Z: 25/2mm
Article no.: 222050 25/2
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 8 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overhang L1 | 60 mm | |
| Overall length Ltot | 140 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 2.79 degrees | |
| Ramping length L for αmax | 7.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Setting angle κ | 10 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222050 25/2 | |
| EAN / GTIN | 4960664707454 | |
| Manufacturer number | THN07610 |
Description
Beschreibung:
Der Hochvorschubfräser MFH Harrier ermöglicht kurze Bearbeitungszeiten durch hohe Vorschubwerte mit hohen Schnitttiefen. Die Kombination aus konvexen Schneidkanten und dem Anstellwinkel reduzieren die Schnittkraft und minimieren die Vibrationsneigung.
Verwendung:
Zur Produktivitätssteigerung beim Plan-, Taschen- und Nutfräsen. Große Auskraglängen beim Tauchfräsen sind durch die geringe Schnittkraft kein Problem.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High feed rate milling cutter MFH Harrier, Plain shank, ⌀ D / number of teeth Z: 25/2mm |
on request
In stock
5 pieces in stock
266,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
292,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 60 mm | 120 mm | 70 mm |
| Overall length Ltot | 140 mm | 200 mm | 150 mm |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
| ⌀ D3 | 8 mm | 13 mm | 15 mm |
| Circular interpolation milling ⌀ Dmax | 48 mm | 48 mm | 48 mm |
| Ramping angle αmax | 2.79 degrees | 3,29 Grad | 2,74 Grad |