{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand tap Plug tap, uncoated, G: G1/2
Article no.: 130560 G1/2
Article code:
- Thread type: G
- Flank angle: 55
- Tool material: HSS
- Standard: DIN 5157
- Shank: Plain shank with h9
Product details
Technical Data
| Thread size | G1/2 | |
| Coating | uncoated | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS | |
| Standard | DIN 5157 | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.814 mm | |
| Threads per inch | 14 | |
| Thread ⌀ | 20.96 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank square □ | 12 mm | |
| Tapping hole ⌀ | 19 mm | |
| Type of threading tool | Hand tap | |
| Colour ring | without | |
| Thread depth | 41.92 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 130560 G1/2 | |
| EAN / GTIN | 4045197067722 | |
| Manufacturer number | 130560 G1/2 |
Application Table
N
N
N
P
P
P
K
Description
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Hand tap Plug tap, uncoated, G: G1/2 |
|||
| Thread ⌀ | 20.96 mm | 20.96 mm | 20.96 mm |
| Thread pitch | 1.814 mm | 1.814 mm | 1.814 mm |
| Through-coolant | no | no | no |
| Tapping hole ⌀ | 19 mm | 19 mm | 19 mm |
| Shank square □ | 12 mm | 12 mm | 12 mm |
| Thread depth | 41.92 mm | 41.92 mm | 41.92 mm |
| Application for type of drilling | up to 3×D for blind holes; up to 3×D for through holes | up to 3×D for blind holes; up to 3×D for through holes | up to 3×D for blind holes; up to 3×D for through holes |