{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS core drill Depth of cut 30 mm 21 mm
Article no.: 118790 21
Article code:
- Tool material: HSS
- Standard: Manufacturer’s standard
- Shank: Weldon shank
Product details
Technical Data
| Nominal ⌀ DC | 21 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | Manufacturer’s standard | |
| Shank | Weldon shank | |
| Shank ⌀ | 19 mm | |
| Cutting depth | 30 mm | |
| Type of product | Core drill |
Identification numbers & Classifications
| Article number | 118790 21 | |
| EAN / GTIN | 4045197514899 | |
| Manufacturer number | 118790 21 |
Application Table
N
60
N
60
P
15
P
10
M
10
Description
Version:
Suitable for all popular magnetic core drilling machines. Very good cutting properties due to optimised cutting edge geometry. Easy to regrind. With Weldon shank - ⌀ 19 mm.
HSS uncoated − attractively priced alternative.
HSS uncoated − attractively priced alternative.
Application:
On mobile magnetic drilling machines or stationary pillar drilling machines to produce large holes in steel construction. The core drill cuts only a thin material ring. The drilled core is ejected by a spring loaded ejector pin.
Supplied with:
Without ejector pin.
Note:
For the lubrication of core drills, we recommend high performance cutting oil (see No. 084210).
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
HSS core drill Depth of cut 30 mm 21 mm |
|||
| Coating | uncoated | TiAlN | TiAlN |
| Nominal ⌀ DC | 21 mm | 21 mm | 21 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Tool material | HSS | HSS | HSS |
| Type of product | Core drill | Core drill | Core drill |