{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub drill with 3 clamping faces HSS-E, uncoated, ⌀ DC h8: 15mm
Article no.: 113001 15
Article code:
- Tool material: HSS E
- Standard: DIN 1897
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 130
Product details
Technical Data
| Nominal ⌀ DC | 15 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 1897 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 130 degrees | |
| Shank | Three drive flats shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 33.5 mm | |
| Flute length Lc | 56 mm | |
| Overall length L | 111 mm | |
| Shank ⌀ Ds | 9.5 mm | |
| Feed f in steel < 900 N/mm2 | 0.16 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 113001 15 | |
| EAN / GTIN | 4062406230302 | |
| Manufacturer number | 113001 15 |
Application Table
N
70
N
45
N
40
P
40
P
30
P
25
P
10
P
8
M
12
M
8
K
25
N
80
Description
Version:
Stable and sturdy stub drill with strengthened core diameter. Ground flutes, with high concentricity. Precision ground point.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Three drive flats on the shank for use in a 3-jaw chuck.
Shank ⌀ 9.5mm.
Shank ⌀ 9.5mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
Stub drill with 3 clamping faces HSS-E, uncoated, ⌀ DC h8: 15mm |
|||||||
| Colour ring | without | without | without | without | without | red | without |
| Through-coolant | no | no | no | no | no | no | no |
| Nominal ⌀ DC | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm | 15 mm |
| Shank | Three drive flats shank | Plain shank | Plain shank | Plain shank | Three drive flats shank | Plain shank | Plain shank |
| Point angle | 130 degrees | 135 degrees | 130 degrees | 130 degrees | 130 degrees | 130 degrees | 118 degrees |
| Flute length Lc | 56 mm | 56 mm | 56 mm | 56 mm | 114 mm | 114 mm | 56 mm |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |