{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 125 mm | |
Number of cutting edges Z | 8 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Plunging; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 8 mm | |
Overall length Ltot | 63 mm | |
Mounting bore ⌀ | 40 mm | |
suitable indexable insert | WNMU 0806.. | |
Insert screw | 229700 (T15; 4.2 Nm) | |
Type of product | End / face mill |
Article number | 225615 125/8 | |
EAN / GTIN | 4960664647705 | |
Manufacturer number | THN04703 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() Indexable milling cutter 90° MFWN 125/8 mm |
||||
Mounting bore ⌀ | 40 mm | 40 mm | 40 mm | 40 mm |
Overall length Ltot | 63 mm | 63 mm | 63 mm | 63 mm |
Through-coolant | yes | yes | yes | yes |
suitable indexable insert | WNMU 0806.. | BG.. 15L5.. | SO.. 1205.. | AP.. 1805.. |
Shank type | with bore | with bore | with bore | with bore |
Cutting edge ⌀ DC | 125 mm | 125 mm | 125 mm | 125 mm |
Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees |