{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Serie | Softcut® | |
Schneiden-⌀ DC | 40 mm | |
Anzahl Schneiden Z | 4 | |
Shank type | with bore | |
Setting angle κ | 90 degrees | |
Milling application | Corner milling; Circular milling; Ramping | |
Spacing of the cutters | unequal spacing | |
Through-coolant | yes | |
Machining strategy | MTC | |
Tool exchange | PowerCard | |
Gesamtlänge Lges | 40 mm | |
Aufnahmebohrungs-⌀ | 16 mm | |
⌀ D3 | 34 mm | |
Bohrzirkularfräsen ⌀ Dmin | 74 mm | |
Bohrzirkularfräsen ⌀ Dmax | 78 mm | |
Bohrzirkularfräsen ap | 1 mm | |
Rampingwinkel αmax | 0,9 Grad | |
Rampinglänge L für αmax | 31,95 mm | |
passende Wendeschneidplatte | AP.. 1805.. | |
Wendeplattenschrauben-Set | 219808 (15IP; 3.8 Nm) | |
Type of product | End / face mill |
Article number | 215160 40/4 | |
EAN / GTIN | 4045197349262 | |
Manufacturer number | 215160 40/4 |
This article |
Recommendations |
|||
---|---|---|---|---|
GARANT Softcut 90° shoulder mill MTC, with bore, ⌀ D / number of teeth Z: 40/4mm |
on request
In stock
25 pieces in stock
292,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
IDR 284.00
plus VAT at the current rate
Prices plus delivery costs
|
||
Anzahl Schneiden Z | 4 | 2 | 2 | 2 |
Milling application | Corner milling; Circular milling; Ramping | Eckfräsen; Zirkularfräsen; Ramping | End milling; Circular milling; Ramping | Circular milling; Ramping; End milling |
Gesamtlänge Lges | 40 mm | 200 mm | 180 mm | 170 mm |
Through-coolant | yes | nein | yes | yes |
passende Wendeschneidplatte | AP.. 1805.. | AP.. 1805.. | AP.. 1335.. | AP.. 1003.. |
Schneiden-⌀ DC | 40 mm | 25 mm | 25 mm | 25 mm |
Type of product | End / face mill | Eckfräser | End / face mill | End / face mill |