{{ name }}
Cikkszám {{ combinedCodeWithHighlight }}
Cikkszám:
EAN / GTIN:
Gyártó száma:
KOMET KUB Pentron® váltólapkás telibefúró ABS® szár, 5×D, ⌀ DC: 31mm
Cikkszám: 236604 31
Cikkszám:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ABS
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Termékadatok
Technikai adatok
| Series | KUB Pentron® | |
| Nominal ⌀ D | 31 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ABS | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 155 mm | |
| for inch ⌀ | 1 7/32 in | |
| Overhang LA | 194 mm | |
| ABS® shank ⌀ Ds | 63 mm | |
| ISO code indexable insert | SOGX 100408 32-... | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Azonosító számok és osztályozások
| Cikkszám | 236604 31 | |
| EAN / GTIN | 4047109198890 | |
| Gyártó száma | U45 63100 |
Leírás
Version:
Bore tolerance: D − 0.1 / + 0.35
Application:
Recommendation:
When spot-drilling reduce the feed rate to 70%.
Note:
- For use only under stable machining conditions.
- Version 2×D and 3×D with ABS® shank available on request.
- Offset-axis drilling up to Vmax = 0.25 mm.
- Maximum ⌀ = D + 0.5 mm achievable by offsetting.
- Version with PSC shank available on request.