{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 4,5 mm
Article no.: 160150 4,5
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 4,5 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 41 mm | |
| Overhang L1 | 51 mm | |
| Overall length L | 81 mm | |
| Number of cutting edges Z | 6 | |
| Shank square □ | 3,55 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 4,5 | |
| EAN / GTIN | 4045197937155 | |
| Manufacturer number | 160150 4,5 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Hand reamer H7 4,5 mm
on request
In stock
198 pieces in stock
26,57 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
91,08 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
116,73 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 6 | 6 |
| Overhang L1 | 51 | 40 | 40 |
| Colour ring | without | green | green |
| Nominal ⌀ DC | 4,5 | 4,5 | 4,5 |
| Flute length Lc | 41 | 23 | 23 |
| Tool material | HSS | Solid carbide | Solid carbide |
| Application for type of drilling | for through hole | for through holes | for through holes |