{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Product details
Technical Data
| ISO code indexable insert | WNMG 080408 | |
| Corner radius | 0.8 mm | |
| Grade | PDL010 | |
| Tool material | Carbide | |
| Main application | N | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | AH | |
| Tolerance | G | |
| Cutting depth ap | 1 mm - 3.5 mm | |
| Feed f | 0.1 mm/rev. - 0.4 mm/rev. | |
| Cutting speed vc main application | 200 m/min - 600 m/min | |
| Coating | coated | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252114 PDL010 | |
| EAN / GTIN | 4960664848584 |
Application Table
N
N
N
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
WN.G 080408 PDL010
on request
In stock
320 pieces in stock
from
1
Pieces
£23.12
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
£19.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
from
1
Pieces
13,08 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
from
1
Pieces
12,42 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,35 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | coated | neprevlečeni | neprevlečeni |
| Cutting conditions | slightly interrupted | rahlo prekinjen | rahlo prekinjen |
| Cutting depth ap | 1 mm - 3.5 mm | 0,2 mm - 5 mm | 0,2 mm - 5 mm |
| Chip breaker | AH | AM1 | AM1 |
| Feed f | 0.1 mm/rev. - 0.4 mm/rev. | 0,05 mm/v - 0,6 mm/v | 0,05 mm/v - 0,6 mm/v |
| Main application | N | N | N |
| Cutting speed vc main application | 200 m/min - 600 m/min | 400 m/min - 700 m/min | 400 m/min - 700 m/min |