{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH mini 52/8 mm
Article no.: 221965 52/8
Article code:
- Milling application: Plunging; Ramping; Circular milling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Cutting edge ⌀ DC | 52 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Milling application | Plunging; Ramping; Circular milling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| ⌀ D3 | 45 mm | |
| maximum cutting depth ap max | 1 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 97 mm | |
| Circular interpolation milling ⌀ Dmax | 102 mm | |
| Ramping angle αmax | 0.4 degrees | |
| Ramping length L for αmax | 43.3 mm | |
| suitable indexable insert | LOGU 0303.. | |
| Insert screw | 229713 (8IP; 1.2 Nm) | |
| Setting angle κ | 15 degrees | |
| Fz Helix | 0.8 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 221965 52/8 | |
| EAN / GTIN | 2050001929990 | |
| Manufacturer number | TX781873 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
High feed rate milling cutter MFH mini 52/8 mm
on request
In stock
10 pieces in stock
£383.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
£388.66
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 |
| Setting angle κ | 15 | 20 |
| Milling application | Plunging ;Ramping ;Circular milling | Circular milling ;Circular milling ;Plunging |
| Shank type | with bore | with bore |
| Circular interpolation milling ⌀ Dmin | 97 | 98 |
| Ramping length L for αmax | 43.3 | 44.4 |
| Type of product | Copy mill | Copy mill |