{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable face mill 90°, with bore, ⌀ D / number of teeth Z: 63/6mm
Article no.: 215055 63/6
Article code:
- Setting angle κ: 90
- Milling application: End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling | |
| Through-coolant | yes | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | SOMT 09T304 | |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215055 63/6 | |
| EAN / GTIN | 4045197750327 | |
| Manufacturer number | 215055 63/6 |
Description
Version:
Made of hardened special steel for low vibration and long life. Very good surface finishes are obtained due to projecting flat cutting edge.
Attention:
Without a PowerCard!
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Indexable face mill 90°, with bore, ⌀ D / number of teeth Z: 63/6mm
on request
In stock
15 pieces in stock
£260.54
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
£373.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
£504.27
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
£470.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
£541.32
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
£450.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
£351.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
£280.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
£212.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£406.63
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 6 | 4 | 6 | 6 | 7 | 6 | 6 | 6 | 6 | 6 |
| Mounting bore ⌀ | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
| Overall length Ltot | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm | 40 mm |
| Cutting edge ⌀ DC | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm | 63 mm |
| Pack of insert screws | 219810 (9IP; 2.2 Nm) | 219833 (15IP; 3.0 Nm) | 219833 (15IP; 3.0 Nm) | 219863 (8IP; 2.2 Nm) | 219863 (8IP; 2.2 Nm) | 219810 (9IP; 2.2 Nm) | 219812 (15IP; 5.0 Nm) | 219798 1 (15IP; 3.8 Nm) | 219812 (15IP; 5.0 Nm) | 219798 1 (15IP; 3.8 Nm) |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |