{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped circular saw blade Rake angle positive, ⌀×bore: 250X32Fmm
Article no.: 179600 250X32F
Copy
Article code:
Copy
- Tool material: Carbide
- Components: Carbide
Product details
Technical Data
| ⌀ | 250 mm | |
| Thickness | 3.2 mm | |
| Tool material | Carbide | |
| Bore ⌀ | 32 mm | |
| No. of teeth Z | 80 | |
| Pitch t | 9.8 mm | |
| Number of drive holes | 2 | |
| Drive hole ⌀ | 11 mm | |
| Drive hole pitch circle | 63 mm | |
| suitable for saw makes | Kaltenbach | |
| Components | Carbide | |
| Suitable for material | Metal | |
| Through-coolant | no | |
| Type of product | Circular saw blade |
Identification & Classification
| Article number |
179600 250X32F
Copy |
|
| EAN / GTIN |
4045197095916
Copy |
|
| Manufacturer number |
179600 250X32F
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
850
suitable for / [m/min]
N
ISO code:
650
suitable for / [m/min]
N
ISO code:
450
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.
Advantage:
Particularly suitable for hard anodised profile material.
Application:
On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Positive rake angle 5° for smooth, burr-free cutting on machines with saw blade infeed from below or horizontal. Very suitable for cutting to size, for mitre and ripping cuts on profiles, and for cutting into solid material.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Positive rake angle 5° for smooth, burr-free cutting on machines with saw blade infeed from below or horizontal. Very suitable for cutting to size, for mitre and ripping cuts on profiles, and for cutting into solid material.
Note:
- Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, or bronze it is preferable to use the lowest recommended speed.
- Pay special attention to maintaining an even feed rate; this prevents damage.
- Additional versions on request.
- Further circular saw blades can be found in catalogue volume 2.