{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-PM 3 mm
Article no.: 191250 3
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 8 mm | |
| Overall length L | 52 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.004 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191250 3 | |
| EAN / GTIN | 4045197100993 | |
| Manufacturer number | 191250 3 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
25
M
18
K
55
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
For very high demands on the metal removal rate.
Eccentric relief ground.
For very high demands on the metal removal rate.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Slot drills HSS-PM 3 mm
on request
In stock
842 pieces in stock
32,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
134 pieces in stock
45,54 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
418 pieces in stock
21,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
24,61 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
251 pieces in stock
27,03 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Standard | DIN 844 B | DIN 844 B | Manufacturer’s standard | Manufacturer’s standard | DIN 844 B |
| Tool material | HSS PM | HSS PM | HSS PM | HSS PM | HSS PM |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 | k10 |
| Type | N | N | N | N | N |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |