{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-PM, TiAlN, ⌀ e8 DC: 3,5mm
Article no.: 191250 3,5
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 10 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.004 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191250 3,5 | |
| EAN / GTIN | 4045197101006 | |
| Manufacturer number | 191250 3,5 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
25
M
18
K
55
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
For very high demands on the metal removal rate.
Eccentric relief ground.
For very high demands on the metal removal rate.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Slot drills HSS-PM, TiAlN, ⌀ e8 DC: 3,5mm
on request
In stock
98 pieces in stock
32,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
99 pieces in stock
16,22 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
106 pieces in stock
20,01 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
133 pieces in stock
25,53 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
9,32 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
21,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
17 pieces in stock
10,64 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
68 pieces in stock
24,61 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
84 pieces in stock
14,32 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | TiAlN | uncoated | uncoated | TiAlN | uncoated | TiAlN | uncoated |
| Colour ring | without | without | without | without | without | without | without | without | without |
| Overall length L | 54 mm | 54 mm | 54 mm | 59 mm | 37 mm | 37 mm | 41 mm | 41 mm | 54 mm |
| Cutting edge ⌀ DC | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm | 3.5 mm |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees |
| No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 |
| Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |