{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
ET collet for thread tapping, with axial compensation, ET 25, Nominal clamping ⌀ d: 10mm
Réf.: 309430 10
Référence:
- Standard: Manufacturer’s standard
Détails du produit
Caractéristiques techniques
| Nominal clamping ⌀ d | 10 mm | |
| Adapter | ET 25 | |
| Standard | Manufacturer’s standard | |
| Type | 4285 E | |
| External ⌀ D | 26 mm | |
| Overall length L | 34 mm | |
| Axial range | 8 mm | |
| Type of product | Collet |
Numéros d’identification et classifications
| Référence article | 309430 10 | |
| EAN / GTIN | 2050001704061 | |
| Réf. fabricant | 13365011000 |
Description
Version:
Collet for thread tapping, similar to DIN 6499 / ISO 15488, Form CET-GB, concentricity 20 µm.
Application:
For tapping on milling and turning centres.
Suitable for:
All standard ER collet chucks.
Note:
Clamps only the nominal ⌀. Not compatible with the CENTRO P precision ER collet chuck.
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
ET collet for thread tapping, with axial compensation, ET 25, Nominal clamping ⌀ d: 10mm |
|||
| Adapter | ET 25 | ET 25 | ET 32 |
| External ⌀ D | 26 mm | 26 mm | 33 mm |
| Overall length L | 34 mm | 35 mm | 42.5 mm |
| Nominal clamping ⌀ d | 10 mm | 10 mm | 10 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Type of product | Collet | Collet | Collet |