{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Roughing end mill HSS-Co8 20 mm
Réf.: 192610 20
Référence:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Détails du produit
Caractéristiques techniques
| Cutting edge ⌀ DC | 20 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.15×D for side milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 75 mm | |
| Overall length L | 141 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.057 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Numéros d’identification et classifications
| Référence article | 192610 20 | |
| EAN / GTIN | 4067263291152 | |
| Réf. fabricant | 192610 20 |
Tableau d’application
N
100
P
60
P
45
P
45
M
13
M
11
K
36
N
73
Description
Version:
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
End face geometry for plunging and unequal spacing of the teeth.
End face geometry for plunging and unequal spacing of the teeth.