{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® 90° shoulder mill MTC 63/4 mm
Article no.: 215161 63/4
Article code:
- Setting angle κ: 90
- Milling application: Corner milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 63 mm | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Corner milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 4 | |
| Number of indexable inserts | 16 | |
| maximum cutting depth ap max | 55 mm | |
| Overall length Ltot | 72 mm | |
| Mounting bore ⌀ | 27 mm | |
| suitable indexable insert | AP.. 1805.. | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215161 63/4 | |
| EAN / GTIN | 4045197455222 | |
| Manufacturer number | 215161 63/4 |
Description
Version:
High precision square shoulder milling cutter with irregular pitch for very smooth cutting, very high precision and cutting power. High performance indexable square shoulder milling cutter with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For corner milling to large depths, also slotting. General use in all steels including stainless steels.
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres (MTM).
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut® 90° shoulder mill MTC 63/4 mm
on request
In stock
21 pieces in stock
BGN 2,154.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
BGN 2,557.31
plus VAT at the current rate
Prices plus delivery costs
|
|
| Mounting bore ⌀ | 27 | 27 |
| suitable indexable insert | AP.. 1805.. | LO.. 130708 |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 63 | 63 |
| Setting angle κ | 90 | 90 |
| maximum cutting depth ap max | 55 | 47 |
| Type of product | End / face mill | End / face mill |