{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 10 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | NR | |
Tolerance nominal ⌀ | k12 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 22 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.014 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 192600 10 | |
EAN / GTIN | 4045197106971 | |
Manufacturer number | 192600 10 |
This article |
Recommendations |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|
Roughing end mill HSS-Co8, uncoated, ⌀ k12 DC: 10mm
on request
In stock
138 pieces in stock
BGN 51.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
BGN 88.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
BGN 85.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
BGN 76.26
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
BGN 106.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
204 pieces in stock
BGN 95.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
83 pieces in stock
BGN 89.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
BGN 75.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
121 pieces in stock
BGN 46.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,193 pieces in stock
BGN 83.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
Colour ring | without | without | without | without | without | without | without | without | without | without |
Milling profile | NR | NF | NR | NR | NR | NR | NR | NR | NR | NR |
Helix angle | 30 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 30 degrees | 30 degrees |
No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 6 mm | 10 mm | 6 mm | 10 mm | 6 mm | 6 mm | 10 mm |