{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 25 mm
Article no.: 192600 25
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal and oblique | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.031 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192600 25 | |
| EAN / GTIN | 4045197107107 | |
| Manufacturer number | 192600 25 |
Application Table
N
83
P
30
P
25
P
25
P
12
K
23
Description
Version:
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
Up to size 20 end cutting teeth profile for plunging.
Up to size 20 end cutting teeth profile for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Roughing end mill HSS-Co8 25 mm
on request
In stock
10 pieces in stock
BGN 180.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
89 pieces in stock
BGN 257.54
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
BGN 209.17
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated |
| Colour ring | without | without | without |
| Through-coolant | no | no | no |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Tolerance nominal ⌀ | k12 | k10 | k12 |
| Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique |
| Shank ⌀ Ds | 25 mm | 25 mm | 25 mm |