{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill 10 mm
Article no.: 191640 10
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.03 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191640 10 | |
| EAN / GTIN | 4045197104328 | |
| Manufacturer number | 191640 10 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Universal end mill with relief ground semi-roughing profile.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Semi-roughing end mill 10 mm
on request
In stock
70 pieces in stock
BGN 88.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
BGN 85.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
BGN 89.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
90 pieces in stock
BGN 51.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,247 pieces in stock
BGN 83.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | uncoated | TiAlN |
| Colour ring | without | without | without | without | without |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.03 mm | 0.025 mm | 0.025 mm | 0.014 mm | 0.014 mm |
| Corner chamfer width at 45° | 0.3 mm | 0.4 mm | 0.4 mm | 0.5 mm | 0.5 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |