{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Semi-roughing end mill 12 mm
Article no.: 191640 12
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NF
- Tolerance nominal ⌀: k10
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NF | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191640 12 | |
| EAN / GTIN | 4045197104342 | |
| Manufacturer number | 191640 12 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Universal end mill with relief ground semi-roughing profile.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Centre cutting teeth for plunging.
Eccentric relief ground.
Universal cutting edge geometry.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Semi-roughing end mill 12 mm
on request
In stock
147 pieces in stock
BGN 104.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
115 pieces in stock
BGN 101.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
142 pieces in stock
BGN 106.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
BGN 66.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,170 pieces in stock
BGN 102.35
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | without | without |
| Milling profile | NF | NR | NR | NR | NR |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Helix angle | 25 degrees | 25 degrees | 25 degrees | 30 degrees | 30 degrees |
| Tolerance nominal ⌀ | k10 | js12 | js12 | k12 | k12 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |