{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 34mm
Article no.: 164180 34
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 34 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 33.060 mm - 34.050 mm | |
| Flute length Lc | 78 mm | |
| Overhang L1 | 194 mm | |
| Overall length L | 321 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 34 | |
| EAN / GTIN | 4045197092755 | |
| Manufacturer number | 164180 34 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 34mm
on request
Available in 1-2 weeks
0 pieces in stock
BGN 708.49
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
BGN 458.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 832.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 793.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 6-8 weeks
0 pieces in stock
BGN 870.43
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 8 | 8 | 5 |
| Coating | uncoated | uncoated | TiAlN | TiAlN | uncoated |
| Colour ring | without | without | green | green | without |
| Overall length L | 321 mm | 321 mm | 200 mm | 200 mm | 364 mm |
| Through-coolant | no | no | yes, with 25 bar | yes, with 25 bar | no |
| Shank | Morse taper | Morse taper | DIN 6535 HA with h6 | DIN 6535 HA with h6 | Morse taper |
| Application for type of drilling | for through hole | for through hole | for through holes | for blind holes | for through holes |