{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 31mm
Article no.: 164180 31
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 31 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 30.010 mm - 31.050 mm | |
| Flute length Lc | 75 mm | |
| Overhang L1 | 185 mm | |
| Overall length L | 285 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 3 | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 31 | |
| EAN / GTIN | 4045197092694 | |
| Manufacturer number | 164180 31 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 31mm
on request
Available in 1-2 weeks
0 pieces in stock
BGN 575.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 755.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
BGN 721.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 6-8 weeks
0 pieces in stock
BGN 654.51
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN | TiAlN | uncoated |
| Colour ring | without | green | green | without |
| Overall length L | 285 mm | 200 mm | 200 mm | 326 mm |
| Through-coolant | no | yes, with 25 bar | yes, with 25 bar | no |
| Shank | Morse taper | DIN 6535 HA with h6 | DIN 6535 HA with h6 | Morse taper |
| Application for type of drilling | for through hole | for through holes | for blind holes | for through holes |
| Type of product | Phillips bit | Phillips bit | Phillips bit | Phillips bit |